330-650-5561

Industrial Structure Information Blog

Category Archives: Vinyl products

The #900 Stair Tread with Riser

We’ve got an announcement! New things are coming to the Floor-Mat Store! We are currently in the process of replacing our Uno-Tread 901 stair tread and riser combo, and bringing production of them back into the states! You will still be able to get the same beautiful, seamless design you have come to expect, but now with our new replacement tread #900 the colors will match with all of our other treads and landing tiles. That means you will be able to coordinate the color pallet across all of your staircases with the new colors, whether they are closed or open risers. Ultimately leaving you with a far more professional and cohesive look.

Our replacement #900 Tread will come in color series 1 and 3. These are made to order with a usual lead time of around four weeks.

For those of you who already have the Uno-Tread 901 series tread, you may want to consider ordering a few extras while we still have some on the shelves. Whatever we still have in stock is all that is left, and a preemptive order of a couple could save you having to redo your entire stair system should one of your steps start to show wear. For quoting on the #900 tread call in or email at (330)650-5561 X: 401 – sales@floormatstore.com

Use Nose Caulk To Get The Most Life Out Of Your Stair Treads

Leave a reply

Improperly installed stair tread

The most common reason for replacing rubber or vinyl stair treads is that the nosing is cracking or falling off. This type of damage is almost always due to the installer missing one very important step, drastically shortening the lifespan of a tread – not to mention also voiding your tread warranty due to an improper installation.

When installing rubber and vinyl stair covering, one of the most often overlooked but essential steps is putting in the nose caulking. Modern square nose stair treads have a channel on the inside corner of the nose which gives the nosing piece flexibility enough to fit any angle riser from 60° to 90°. Without filling that channel with nose caulking, you’re allowing the stair tread to flex in the most vulnerable spot. The more often that area flexes, the more vulnerable it becomes, and sooner than later, you’ll get a crack which spreads across the nose.

Epoxy Nose Caulk

There are two options for installing nose caulking; you can find both options on our FloorMat Store website. The easiest option is to use a dual cartridge unit and a dual cartridge caulking gun, that covers 50 linear feet per unit. Just pop the cartridge in and squeeze a small bead along the inside of the nose bend. If you are taking your time with the installation, or breaking up a large job, make sure to order extra nozzles too, so you can cap the unit between uses.

Nose Caulk Gun – Dual Cartridge

The other method is a two part quart unit, which is a bit more difficult, but a lot more budget friendly. You mix the two parts as directed on the side of the cans, and using a trowel or putty knife, slip some in place along the nosing. A single quart unit will cover 75 linear feet if properly mixed, used before dried and applied correctly. Remember, once mixed, you’re fighting the clock; try not to take a break from installing, or you may come back to find your mixture has already set.

Can of Nose Caulk – covers ups to 75 LF

If you are installing stair treads over steps that have worn edges, make sure that you use a heavy hand when applying the nose caulking, so it can properly fill out the area to give a solid backing to the tread.

–Floormatstore.com

Vinyl Bollard Covers Keep Your Bollards Looking New

2 Replies

These rusty bollards could use some sprucing up

Winter is beginning to subside. The snow and ice are melting away and all sorts of things are being unearthed — some terrifying. I’m talking about your bollards of course. And they look horrible. Everyone has been out and about enjoying the warmth, but they are also seeing some really nasty weather stricken bollards. Sure you are thinking, “Well I’ll just get someone out to paint that again,” just like every other year. But the fact of the matter is, between now and then, your business is looking shabby, and you are continually paying for product and labor just to keep up. I’m sure we have all heard the saying “Dress for the job you want, not the job you have.” This statement stands true for a lot more than just our personal appearance. I’m far more likely to feel confident about a bank handling my money that looks well maintained than one that has peeling paint and layers of rust. Sunlight and moisture can cause serious damage to bollards, and quickly. The more nicked and flaky they look, the less and less professional the establishment looks, leaving people less likely to trust the service you are providing them.

color chart for vinyl bollard covers and sleeves

Available in 10 standard colors, our vinyl bollard covers will help your bollards stand out in a good way.

There are so many benefits to a good bollard cover that I find it difficult understanding why I ever see them without one. Not only does it quickly (and I mean quickly as it often takes about a minute for installation) enhance the aesthetic of your business, but it can also keep your company’s name looking good. Vinyl bollard covers are some of my favorite for the simple reason that they are durable. If one of your trucks comes into contact with a bollard, it easily results in scratches, and even dents. A vinyl cover adds surprisingly effective impact protection. No longer are your vehicles getting an unwanted makeover by a solid metal pole; instead, they now have a sturdy bit of cushion that can far better absorb blunt force impacts. No more scraped rusty bollards, and no more scraped rusty trucks.

In the time that it takes you to tie your shoes, you can easily have eliminated years of maintenance, all while helping cement your place in your customer’s confidence. Your rusted bollards look horrible; it’s time to cover them up.

-Reese @ Floormatstore.com