|
* Name
|
|
|
Company/Organization
|
|
|
Title or Position
|
|
|
Address
|
|
|
City
|
|
|
State
|
|
|
Zip Code
|
|
|
* Phone
|
|
|
Fax
|
|
|
* Email
|
|
|
What are you lifting?
Briefly describe the material/products needing to be moved.
|
|
|
What is the size of the load?
Provide dimensions & weight of the loads the lift will be used for.
|
|
|
How is material being loaded at each level?
Indicate the method of loading/unloading at each level (i.e. forklift, pallet truck, hand truck, hand, etc.
|
|
|
Weight capacity?
Enter the MAX weight capacity needed. Enter only increments of 500 pounds.
|
lbs. |
|
Required platform size?
The platform size should be at least 1 foot larger than the material being moved. Only enter the width and depth in feet/inches (ex. 5ft 4in. x 5ft 4in).
|
Width x Depth |
|
Load/Unload Configuration?
Our lifts have up to 3 available load/unload configurations. If you are unsure the type of configuration you are looking for, click here for details on each.
|
|
|
Travel Height?
The travel height is the distance between the ground floor and the top level floor. Enter the distance in feet/inches (ex. 24ft 5in, 36ft 11in).
|
|
|
Number of Stops?
The number of stop is the number of levels the lift will stop at for loading/unloading. A push button station will be located at each level indicated. If more than 6 stops are required, please indicate in the Special Requirements section at the end of this RFQ.
|
|
|
Power Source?
All units require 3 Phase. Select the voltage available to power the lift.
|
|
|
Soft-Start/Soft-Stop?
For smooth transitions, we offer a feature called Soft-Start/Soft-Stop. This allows the lift platform to gradually accelerate and decelerate instead of a sudden start/stop.
|
Yes
No
|
|
Load Height?
Enter the height of the material being moved. Depending on the model, load heights are 72" or open.
|
inches
|
|
Mounting?
Our lifts may be mounted on a regular floor or in a pre-dug pit. Pit mounting helps to provide a flush surface between the ground floor and platform (ex. like a passenger elevator). Ramp mounting requires a ramp to be able to load material easily.
|
Optional Ramp?
|
|
Ceiling Height (above top level)?
Enter the height between the top level and the lowest obstruction where the lift will be installed, such as: roof, beams, pipes, another level, etc.
|
inches
|
|
Pass Through Floor?
Will this lift pass thru any openings in floors at any level?
|
Yes
No
|
|
Environment?
To properly determine the design/configuration of the lift, we must know the environment it will be in.
|
Inside
Outside
Wet
Gases
Cold
Other:
|
|
Explosion Proof?
Due to certain environment the lift will be in, some units may require explosion proof. This is a must when working near or with explosive gases. If this option is required, please indicate.
|
Yes No
Class: Div: Group:
|
|
Special Requirement / Comments?
Enter any additional requirements not addressed in the above questions.
|
|
|
Is this a budgetary quote?
|
Yes No |
|
When do you expect to buy?
|
|
|
|
|
A-Mezz Industrial Structures, Inc. • Cleveland, Ohio 44236 • Toll Free: 888-432-2657